Rye Grain SpawnJar™

£16.95

Completely sterile and ready for inoculation

With over 16 years worth of experience, it’s safe to say that we know how to produce grain spawn to perfection!

Category: Tag:

Rye Grain SpawnJar™

With fitted SFD lid for premium spawn production.

This product is intended for use within a still-air box or laminar flow hood.

 

Included

  • Sterile Rye Grain (Perfectly hydrated / organic / with added gypsum)
  • 1000ml SpawnJar at 65% fill-level to accomodate G2G and shaking
  • Air exchange via HEPA-Filtered lid (Synthetic Filter Disc technology)
  • Chlorhexidine alcohol wipe
  • Sterilised in a sealed SteriBag™ to keep entire SpawnJar sterile until use
  • SteriBag™ can be doubled as an incubation bag to keep the SpawnJar clean through colonisation

 

Not included

  • Gourmet mushroom culture
  • Still-Air Box / SAB. Buy one here or make one out of a plastic box with cut arm holes

 

Using Gourmet Spore or Culture Syringe

Important: Perform all steps within a Still-air box (SAB) (or in front of a flowhood) to a high cleanliness standard. SAB’s can be made or purchased from us.
  • Remove the lid and inject around the SpawnJar™ (against the glass) with 2-3ml of gourmet spore or liquid culture solution
  • Leave in a warm place to colonise at around 20C. Mycelium will usually start growing after just a few days to a week

 

Using Agar Wedge or G2G Transfers

Important: Perform all steps within a Still-air box (SAB) (or in front of a flowhood) to a high cleanliness standard. SAB’s can be made or purchased from us.
  • Remove the lid and drop a piece of colonised agar or pour already colonised grain you may have from another SpawnJar/Tub
  • Leave in a warm place to colonise at around 20C. Mycelium will usually start growing outwards in a day

 

Important

This SpawnJar is designed for cultivators who have no use for an injection port. A flowhood or SAB is a must.
If there is rust on the jar lid don’t worry, it’s very normal and should be expected.
Once it’s time to open the jar, you will notice the metal lid underneath the white SFD is upside down; this is intentional for much easier and quicker removal of the lid. (Rubber side down sticks too much!)
Always remove the lid to inoculate and never try to inject through the SFD filter.
Product is made fresh to order, we aim to produce and dispatch within 0-3 working days (Mon-Fri) from the moment we confirm payment.
Only for use in cultivating species which are legal to grow – research the law.

 
  Ask questions about this product here!

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.